What is Conveyor chain Each bearing consists of a pin and a bushing on which the chain's rollers rotate. Both the pin and the bushing are case hardened to allow articulation together under high pressu

Non-inductive resistors only need the resistance on the wire or coil to work, and there should be no inductance or voltage generated by induction.

A roller chain is a type of chain used to transmit mechanical power.

Valves are pipeline accessories used to open and close pipelines, control flow direction, adjust and control the parameters (temperature, pressure and flow) of the conveying medium.

Hot melt adhesive is a kind of plastic adhesive. Its physical state changes with temperature within a certain temperature range, but its chemical properties remain unchanged.

Glycerol, also known as glycerin, is an organic compound with a chemical formula of C3H8O3.

Coupling refers to a device that connects two shafts or shafts and rotating parts, and rotates together during the transmission of motion and power, and does not disengage under normal conditions.

Needle bearings are roller bearings with cylindrical rollers that are thin and long relative to their diameter.

Bearing is an important part of contemporary mechanical equipment. Its main function is to support the mechanical rotating body, reduce the friction coefficientduring its movement, and ensure its rota

The slewing bearing is a large bearing with a special structure that can bear comprehensive loads such as large axial loads, radial loads, and overturning moments at the same time, and integrates mult

The working principle of the gear coupling can be divided into two parts: gear transmission and coupling transmission. First of all, gear transmission refers to the meshing between two gears, and the

The gear coupling is composed of an inner ring gear with the same number of teeth and a flange half coupling with outer teeth. External teeth are divided into two tooth shapes: straight teeth and drum