The torque converter (Torque Converter, referred to as TC) is located at the front end of the hydraulic automatic transmission and is installed on the flywheel of the engine.

Transmission , also known as gearbox, is a mechanism used to change the speed and torque from the engine.

A quick connector is a connector that can be connected or disconnected without tools.

A gear is a mechanical element with teeth on the rim that can continuously mesh to transmit motion and power.

A sprocket is a wheel with cog-type sprockets designed to engage precisely pitched blocks on a chain link or cable.

A pulley is a simple machine used to lift heavy objects and save effort.

What is Conveyor chain Each bearing consists of a pin and a bushing on which the chain's rollers rotate. Both the pin and the bushing are case hardened to allow articulation together under high pressu

Non-inductive resistors only need the resistance on the wire or coil to work, and there should be no inductance or voltage generated by induction.

A roller chain is a type of chain used to transmit mechanical power.

Valves are pipeline accessories used to open and close pipelines, control flow direction, adjust and control the parameters (temperature, pressure and flow) of the conveying medium.

Hot melt adhesive is a kind of plastic adhesive. Its physical state changes with temperature within a certain temperature range, but its chemical properties remain unchanged.

Glycerol, also known as glycerin, is an organic compound with a chemical formula of C3H8O3.