I am an aluminum plate manufacturer, I would like to introduce the use and characteristics of 5052 aluminum plate produced by our factory :5052 aluminum plate belongs to 5 series aluminum plate, the material is mainly al-mg series alloy material, the main elements are silicon, copper, magnesium, sin, manganese, chromium, iron and so on. Can not be heat treatment to strengthen the setting, in the semi-cold state for hardening fixed plastic, because of the cold hardening plasticity is low, so good corrosion resistance, easy to weld, but in the cutting aspect is not very convenient, can be polished, is a kind of rust good aluminum material, alloy strength is high, so in some aluminum plate fatigue strength is widely used. Our production of 5052 aluminum plate is rolling processing, that is, often said rolling processing, hot rolling and casting rolling, for the hot rolling process when the internal plasticity is deformed, the internal structure of the aluminum plate has been restored to crystallization for many times, and the fine grain of the casting state is broken, improving the performance of the aluminum plate, and the hot rolling material has an incomparable advantage in the aspect of deep drawing. Because of the corrosion resistance and fatigue resistance of this aluminum plate, it is mostly used in the manufacture of aircraft fuel tanks, oil pipes, and traffic vehicles, ships, and instruments.

The difference between T6 and T651 in the state of 061 aluminum plate

The difference between T6 and T651 is that under normal circumstances, the internal stress of T6 will be relatively large, and the processing will be deformed. The most suitable state for processing should be T651, which is stretched on the basis of T6 to eliminate the internal stress. The main alloying element of 6061 aluminum plate is magnesium and silicon, and forms Mg2Si phase. If it contains a certain amount of manganese and chromium, it can neutralize the bad effect of iron; Sometimes a small amount of copper or zinc is added to improve the strength of the alloy without significantly reducing its corrosion resistance; There is also a small amount of copper in the conductive material to offset the adverse effects of titanium and iron on electrical conductivity; Zirconium or titanium can refine grain and control recrystallization structure; To improve machinability, lead and bismuth can be added. Mg2Si is soluble in aluminum, which makes the alloy have artificial aging function. The main alloying elements in our aluminum plate manufacturer 6061 aluminum alloy are magnesium and silicon, which has moderate strength, good corrosion resistance, weldability and good oxidation effect.

Alcoa 6061 has excellent machining performance, good corrosion resistance, high toughness and no deformation after processing, easy color film, excellent oxidation effect and other excellent characteristics.

It is an Al-Mg-Si alloy with medium strength, good plasticity and excellent corrosion resistance. In particular, there is no stress corrosion cracking tendency, its excellent weldability, corrosion resistance and cold workability are good, and it is a wide range of use. A very promising alloy. Can be anodized coloring, can also be painted on enamel, suitable for various industries. It contains a small amount of Cu, so the strength is higher than 6063, but the quenching sensitivity is also higher than 6063, after extrusion can not achieve wind quenching, need to re-solution treatment and quenching aging, in order to obtain higher strength.

Link-B2B is a professional supplier listing service platform which will provide high quality and trustworthy supplier list to international buyers. If you are looking for aluminum plate suppliers, feel free to visit Link-B2B.com and send a request.