Who can customers who need aluminum profiles go directly to? Of course, it is an aluminum profile processing customization manufacturer. Such a manufacturer is complete in all aspects. Processing customization includes extrusion molding, cutting and drilling, deep processing, assembly, etc. The aluminum profile processing customization manufacturer that can meet these requirements is definitely not bad.

The stress-strain state of aluminum profile is a characteristic, which only occurs during extrusion, which is also related to raw materials. The process of extruding aluminum profiles includes two points: productivity and efficiency. Every extrusion molding, the same die can always extrude aluminum profiles with the same section, which not only saves a lot of labor costs, but also saves costs and materials.

Everything is good and bad. The disadvantage of extruding aluminum profiles is that friction will occur during extrusion. When the friction is large, the energy consumption will increase, which will damage the mold. After a long time, cracks will appear on the surface, and sometimes the unstable temperature will lead to uneven quality of extruded aluminum profiles, which also belongs to the phenomenon that aluminum profiles are limited by the extruder.

About the size of 8080 aluminum profile

8080 aluminum profile belongs to 80 series, including MC-8-8080, section 80*80, length 6.02m, unit mass 5.20kg/m, MC-8-8080G, section 80*80, length 6.02m, unit mass 6.10kg/m and MC-8-8080GF. The unit mass is 6.33kg/m, MC-8-8080GR, the section is 80*80, the length is 6.02m, and the unit mass is 4.15kg/m. Series 80 also includes MC-8-80120 and MC-8-80160, and the sections are 80*120 and 80*160 respectively.

The size of 8080 aluminum profile, that is, its cross section, is the same except for the different thickness and the different inside of the cross section. They are all 80*80, and this cross section is relatively large.

The transparent protective cover of aluminum profile is visually superior.

When using robots, more and more factories add a layer of protective measures around them. Like fences, the frame of such fences is usually made of aluminum profiles, with transparent acrylic plates or plexiglass plates.

When using robots, more and more factories add a layer of protective measures around them. Like a fence, the frame of this fence is usually made of aluminum, with transparent acrylic or plexiglass plates, which is also called aluminum transparent protective cover.

It is well known that there are some minor problems that need to be adjusted in time during the operation of the robot, and the operators are easy to be accidentally injured when they are too close. Sometimes, there are tools such as trolleys and consignment cars in the factory, which will be encountered if you don't pay attention. The robot is also very expensive, and no matter which one is injured, it is not worth the loss. At this time, the transparent protective cover of aluminum profiles plays a key role.

The transparent protective cover of aluminum profile can prevent unnecessary collision and damage, but it can't be well protected. It is necessary to see the operation process of the instrument and adjust it accordingly. The benefits and advantages of the transparent protective cover of aluminum profile are visible, and it is definitely the best from the line of sight.

Link-B2B is a professional supplier listing service platform which will provide high quality and trustworthy supplier list to international buyers. If you are looking for aluminum profile suppliers, feel free to visit Link-B2B.com and send a request.