What are the factors affecting the efficiency of the sand making machine in the sand production line?

After the sand production line is built, it is necessary to understand what factors affect the efficiency of the sand making machine, which is conducive to the normal operation of the sand production line:

1. The viscosity of the material, that is, the higher the viscosity of the material, the easier it is to adhere. The material with high viscosity is stuck in the sand making machine, if it can not be cleaned in time, it will seriously affect the working efficiency of the sand making machine, and seriously affect the normal operation of the sand making machine. Therefore, when selecting the material, please note that the viscosity of the material cannot be too large.

2. Before making sand, the more powder contained in the material, the greater the impact on making sand. Because these powders are easy to attach, affecting the transportation. Therefore, for materials with high fine powder content, it is necessary to screen once in advance. As far as possible from the material to screen fine powder, so as not to affect the normal operation of the sand making machine.

3. The fineness of the material after sand making is required to be high. In other words, the finer the material required to make sand, the smaller the capacity to make sand. This aspect is determined according to the specific requirements of the concentrator, if there is no special requirement, the fineness of the material can generally be set to medium fineness.

4. Material hardness. The harder the material, the more difficult it is to make sand, and the more serious the wear of the sand making machine. The speed of sand making is slow, and of course the capacity of sand making is small. To this end, we should be suitable for the selection of materials.

Operation rules of sand making machine:

1. Before starting the machine, check the adjustable vortex chamber and observe whether the door is closed tightly to prevent materials from rushing out of the vortex chamber observation door and prevent dangers.

2. Check the impeller rotation direction at the entrance. The impeller should be rotated counterclockwise. Otherwise, the motor wiring needs to be adjusted.

3, crusher and conveyor equipment starting sequence is as follows: discharge - crusher - feeder. The crusher needs to start no-load and wait for the crusher to work normally before feeding.

What are the quartz stone sand making equipment for railway, and how much is the price of the sand making machine?

Quartz sand processed from quartz stone has the characteristics of high hardness, wear-resistant, anti-slip and anti-corrosion, and stable chemical properties. Can be used as railway locomotive anti-skid sand, what kind of sand making equipment is used for processing railway special quartz sand.

1. Fixed quartz sand making equipment.

The 5X sand making machine uses the deep cavity impeller design, the processing capacity is larger, the output is higher, between 12-650T /h, with sand making and shaping two functions. Strengthen environmental protection design, whirlpool indoor automatic circulation, no dust spill, sound insulation device, low noise, to meet the green ecological environmental protection production requirements.

2. Mobile quartz sand making equipment.

In recent years, the new sand making equipment has been popular, with compact structure, small turning radius, convenient movement and no need to stack, saving a lot of capital construction costs. It can break the material in the field and move with the advance of the raw material mining face. Reduce material transportation costs. PLC intelligent control system can be operated by one person, a machine is equivalent to a production line, saving labor costs while improving production efficiency.

Quartz sand making equipment price.

Mobile sand making equipment is more expensive than fixed sand making equipment, and the price of different types of equipment will be slightly different. In addition, the price of raw materials, manufacturers and regions will also affect the price of equipment. It is recommended to choose a larger manufacturer, generally do it yourself. Self-produced and self-marketing, the price is more affordable, and the quality is guaranteed.

Link-B2B is a professional supplier listing service platform which will provide high quality and trustworthy supplier list to international buyers. If you are looking for  sand making machine suppliers, feel free to visit Link-B2B.com and send a request.