With the rapid development of China's industry, a lot of industrial supplies have been developed, of which the development of aluminum plate in recent years is also very rapid; Aluminum plates are widely used in various industries. We are more common is to see in the elevator, all four sides are aluminum plates, generally there are four aluminum plates welded.

If the aluminum plate can be successfully welded at one time, the effect is better, but if you want to be successful at one time, you need to learn more about the knowledge of aluminum plate welding, so as to ensure the success of welding.

1. Preparation: wet towel, welding torch, welding powder, flux.

2. When welding, you must first put a wet towel into the inner liner and pay attention to protecting the aluminum plate.

3. The torch flame can not be too long, the temperature can not be too high, and must be heated with a low fire, otherwise the aluminum plate is easy to melt.

4. The electrode must be evenly coated with flux before welding, which can ensure the quality of the solder joint.

5. Pay attention to the welding time, not too long, otherwise it will cause the aluminum wall to thin or even melt.

How to do the maintenance of alloy aluminum plate

Alloy aluminum plate has many series, the surface is shiny, the appearance is neat and beautiful, has the characteristics of high strength, high hardness, corrosion resistance, the usability and processability are very good, often used in aircraft parts, Marine accessories and hardware. However, in order to ensure the use effect of alloy aluminum plates, it is also necessary to do a good job of maintenance of alloy aluminum plates. Let's take a look at how to maintain the alloy aluminum plate.

6061 alloy aluminum plate

1. Can not store aluminum alloy plate with chemical materials and wet materials.

2. When transporting alloy aluminum sheet, pay attention to anti-rain and snow, and cover the alloy aluminum sheet with a sheet.

3. The alloy aluminum plate should be stored in a dry, well-ventilated and non-corrosive environment.

4. Handle the alloy aluminum plate gently to avoid damage to the alloy aluminum plate.

5. The small standard alloy aluminum plate can be placed on the shelf, and the large standard alloy aluminum plate should be placed on the cushion wood when it is stored, and cannot be in direct contact with the ground.

How to correctly store patterned aluminum plate

The patterned aluminum plate is not only beautiful, but also has high strength and excellent anti-slip performance, so it is widely used. Any item needs to be carefully kept so that it will not be damaged, and the patterned aluminum plate is no exception. Here we will explain how to correctly store the patterned aluminum plate.

Five ribbed aluminum plates

1. Requirements for storage environment

The patterned aluminum plate should be stored indoors, in order not to oxidized the surface of the patterned aluminum plate and deteriorate the appearance quality, the indoor environment of the patterned aluminum plate must have a constant and appropriate temperature and dry humidity.

Orange peel pattern aluminum plate

2. The placement requirements for the patterned aluminum plate

To put the patterned aluminum plate on the wooden base, can not be directly placed on the ground. Otherwise, for a long time, the patterned aluminum plate will oxidize because of the damp surface, and it is easy to be hurt and scratched by sharp objects on the ground, so that the quality of the patterned aluminum plate is reduced.

Semi-round ball pattern aluminum plate

3. The temperature varies greatly in different regions, so the patterned aluminum plate should be stored in a well-ventilated place to balance the temperature difference between the inside and outside and then open the package, which generally takes three days.

Link-B2B is a professional supplier listing service platform which will provide high quality and trustworthy supplier list to international buyers. If you are looking for aluminum plate suppliers, feel free to visit Link-B2B.com and send a request.