It can be divided into 1024, 2011, 6063, 6061, 6082, 7075 and other alloy grades of aluminum profiles, of which 6 series are the most common. The difference between different grades is that the ratio of various metal components is not the same, in addition to the commonly used door and window aluminum profiles such as 60 series, 70 series, 80 series, 90 series, curtain wall series and other architectural aluminum profiles, industrial aluminum profiles do not have a clear model distinction, most production plants are processed according to the actual drawings of customers.

The advantages of electrophoretic coating of aluminum profiles

1. Easy to achieve automated production. Because the electrophoretic coating of aluminum profiles is carried out in the water-based electrophoretic tank, similar to the anodic oxidation and electrolytic coloring process, the processing time is short, and it is easy to realize the pipeline operation of the whole process.

2. The film is uniform and dense. Due to the high permeability of the electrophoretic coating of aluminum profiles, the complex shapes of profiles can be uniformly coated, and the film thickness can be controlled by adjusting the electricity.

3. High utilization rate of paint. Due to the low viscosity, less workpiece is taken out, and the electrophoretic workpiece can be washed, and the utilization of the recovery device makes the utilization rate of the electrophoretic coating as high as 95%.

4. Safety and environmental protection. Due to the water dilution of electrophoretic paint, the solid content is low, the solvent content is less environmentally friendly paint, and the danger of fire is eliminated, and the health of workers is also guaranteed.

5. Good coating quality. The acrylic resin is cured with amino resin to ensure the high decoration and high corrosion resistance of the coating film. At the same time, due to the high transparency of the resin, the metal texture of the aluminum profile is effectively highlighted, and the decorative effects such as matte, sand and pearling can be obtained according to the needs.

6. Compared with the usual electrolytic coloring sealing process, it has the characteristics of saving time and manpower, and the electrophoretic coating film does not need to seal holes, avoiding cracks and other problems caused by bad sealing holes.

7. The thickness of the film can be freely controlled, and 7μm and 12μm are usually controlled at home and abroad.

8. Because the electrophoretic layer is transparent and bright, it requires high quality aluminum ingot, smooth surface of extrusion material, fewer mechanical defects, strict management of oxidation coloring process requirements, because any small defects and stains will be exposed under the transparent paint.

9. High requirements for electrophoresis process management to improve the yield of aluminum profiles.

Aluminum plate refers to a rectangular material with a rectangular cross-section and uniform thickness made of pure aluminum or aluminum alloy material through pressure processing (shearing or sawing)

Materials. In the world, it is customary to call aluminum materials with thickness above 0.2mm, below 500mm, above 200mm width and within 16m length aluminum sheets or aluminum sheets, aluminum foil materials below 0.2mm, and row materials or strips within 200mm width (of course, with the progress of large equipment, the widest row materials can be 600mm are also relatively large).

There are usually several aluminum plates in terms of alloy composition:

High purity aluminum plate (rolled from high purity aluminum content above 99.9)

Pure aluminum plate (basically rolled from pure aluminum)

Alloy aluminum plate (composed of aluminum and auxiliary alloy, usually aluminum copper, aluminum manganese, aluminum silicon, aluminum magnesium, etc.)

Composite aluminum plate or welded plate (special purpose aluminum plate material is obtained by means of composite of various materials)

Aluminum clad aluminum plate (aluminum plate coated with thin aluminum plate for special purposes)

By thickness :(unit mm)

Thin sheet 0.15-2.0

Conventional board 2.0-6.0

Middle board 6.0-25.0

Thick plate 25-200

Super thick plate more than 200

Link-B2B is a professional supplier listing service platform which will provide high quality and trustworthy supplier list to international buyers. If you are looking for aluminum plate suppliers, feel free to visit Link-B2B.com and send a request.