Introduce the main classification and industrial application of humidifiers again.

Humidifiers are mainly divided into two types according to their uses: household humidifiers and industrial humidifiers. Ultrasonic humidifier uses high-frequency ultrasonic vibration with a frequency of 1.7MHZ to atomize water into ultrafine particles of 1-5 microns, which can clean the air, improve health and create a comfortable environment.

According to experts, the advantages of ultrasonic humidifier are high humidification intensity, uniform humidification and high humidification efficiency; Save energy and electricity, and the power consumption is only 1/10 to 1/15 of that of the electric humidifier; Long service life, automatic humidity balance and automatic protection without water; It has the functions of medical atomization, cold bath and jewelry cleaning.

Direct evaporation humidifier is also often called pure humidifier. Pure humidification technology is a new technology that has just been adopted in the field of humidification. Pure humidifier removes calcium and magnesium ions from water by molecular sieve evaporation technology, which completely solves the problem of "white powder". Thermal evaporation humidifier is also called electric humidifier. Its working principle is to heat water to 100 degrees in a heater to generate steam, which is sent out by a fan.

Therefore, the electric heating humidifier is the simplest humidifying method in technology, and its disadvantages are high energy consumption, inability to dry-burn, low safety factor and easy scaling on the heater. The market prospect is not optimistic. Electric humidifiers are generally used in conjunction with central air conditioning, and are generally not used alone.

Introduce some solutions to prevent fogging in humidifiers.

What should I do if the humidifier doesn't fog? What is the reason? The following points are analyzed for you: There is wind at the mist outlet and no mist comes out, which means that there is no problem with the fan of the humidifier and there is a problem with the atomizer. There are two cases of atomizer failure, one is that the atomizer has not been cleaned for a long time.

Scale blocked the atomization hole, so the fog couldn't come out. At this time, it is necessary to clean the atomizing sheet. As long as the scale on the atomizing sheet is cleaned with white vinegar, it can be used normally. However, it cannot be cleaned with strong acid, which will completely destroy the atomizing sheet and is not conducive to the maintenance of the humidifier.

The atomizer is aging. In this case, it is necessary to replace the atomizer. Replace the atomizer according to the instructions. When replacing the atomizing sheet, open the bottom cover, and take out a "metal" disc with a diameter of about 20-30 mm directly below the nozzle, which is the atomizing sheet, and put it in a new atomizing sheet.

There is fog at the mist outlet of the humidifier, but it can't float out and is blocked at the mist outlet. This situation is also very common, which is caused by fan failure. If the fan fails to turn, the fog will not come out, which will cause the feeling that the humidifier will not come out of fog. The failure of the fan is mainly due to the failure to connect the power supply. In this case, some humidifier enterprises use transformer power supply, which has no waterproof function and is easy to get wet and burn.

Link-B2B is a professional supplier listing service platform which will provide high quality and trustworthy supplier list to international buyers. If you are looking for humidifier suppliers, feel free to visit Link-B2B.com and send a request.