Introduction of stainless steel seismic table

The stainless steel shock-resistant gauge has good shock-resistant performance, and is especially suitable for measuring the pressure of liquid, gas or steam without explosion danger, crystallization, solidification and corrosion to copper and copper alloys under the condition of strong mechanical vibration and severe pulsation of medium pressure. The instrument has stable indication and clear reading. Widely used in heavy machinery, mining, petroleum, chemical industry, metallurgy, electric power and other departments.

In view of the reasonable overall structural design and fine technology, the instrument has good stability and high durability. The working principle of the instrument is the same as that of the general pressure gauge and the anti-vibration pressure gauge.

The stainless steel shock-resistant meter is a new product developed according to the actual needs of China's industry on the basis of introducing foreign advanced technology. The meter relies on measures such as filling damping liquid (silicone oil and glycerin), installing damping tube, resistor and buffer screw, etc., to overcome the damage caused by strong pulse of medium and strong vibration of environment, ensure the measurement, and make the meter have excellent shock-resistant and vibration-resistant effects, thus achieving safety, reliability, stable indication, clarity and long service life, and being suitable for working environment. 　　

YTN shock-resistant pressure gauge

The stainless steel shock-proof meter consists of pressure guide system (including joint, spring tube, current-limiting screw, etc.), gear transmission mechanism, indicator (pointer and dial) and shell (including watch case, watch cover, watch glass, etc.). 　　

The shell of stainless steel earthquake-resistant meter is airtight structure, which can effectively protect internal parts from environmental influence and pollution invasion. 　　

Stainless steel shock-resistant meter An instrument filled with damping liquid (usually silicone oil or glycerin) in the shell can resist the vibration of working environment and reduce the pulsation influence of medium pressure. Anti-seismic pressure gauges and anti-seismic pressure gauges are suitable for places where the environment is violently vibrated, and can withstand the pulsation, impact and sudden unloading of the medium, and the instrument indication is stable and clear. Widely used in machinery, petroleum, chemical industry, metallurgy, mining, electric power and other departments to measure the pressure of non-corrosive media for copper and copper alloys.

What are the precautions when using a pressure gauge?

First, check before installation

1. Whether the pressure of the monitored point will exceed the measuring range of the instrument; If it is exceeded, please replace the instrument with appropriate range.

2. Is there any instantaneous impact on the pressure at the detected point? If so, please pretend to be a buffer.

3. Whether the measured medium has high temperature (greater than 85℃); If the temperature is too high, please pretend to be a condenser or radiator.

4. The measured medium should be compatible with the strength and corrosion resistance of the instrument shell material.

5, whether the measured medium will block the pressure hole of the instrument; If possible, the shell should be specially customized.

Second, matters needing attention

1. Don't poke the pressure hole with sharp objects or hard objects, and don't press the diaphragm with your hands, which will damage the diaphragm or cause permanent deformation of the diaphragm.

2. When the ambient temperature exceeds the product standard, on-site protective measures should be taken to prevent the LCD from being damaged.

3. When installing the instrument, it is necessary to close the cut-off valve and open the vent valve at the same time, so as to avoid damaging the sensor of the instrument due to excessive pressure caused by pressure holding.

4, if 80℃ or less medium temperature 100℃ or less, should be equipped with condenser tube.

5. When installing the differential pressure gauge, please pay attention to check the high-voltage end and the low-voltage end to avoid damaging the sensor.

6. Users are not allowed to open the instrument and replace components at will

7. Do not change the battery or charge it at will.

Link-B2B is a professional supplier listing service platform which will provide high quality and trustworthy supplier list to international buyers. If you are looking for pressure gauge suppliers, feel free to visit Link-B2B.com and send a request.