Disassembly steps of fluorine plastic magnetic pump

Fluorine plastic magnetic pump has the advantages of strong sealing and no leakage, so it is widely used in chemical, pharmaceutical and other industries. Magnetic pump disassembly need to pay attention to some steps to ensure the smooth disassembly process, the following will introduce the specific steps of fluorine plastic magnetic pump disassembly.

Step 1: Prepare.

Before disassembling the magnetic pump, you first need to do some preparatory work, the pump power has been turned off, and to confirm that there is no liquid in the pump. Second, prepare the necessary tools, such as wrenches.

Step 2: Disassemble the pump body.

The first step in disassembling the fluoroplastic magnetic pump is to disassemble the pump body. Remove the fixing nut of the pump body by turning it counterclockwise with a wrench. Next, use a screwdriver to remove the connecting screw from the pump body. When all the screws have been removed, gently remove the pump body from the base.

Step 3: Remove the rotor.

After removing the pump body, the rotor needs to be removed. First, use a wrench to remove the fixed rotation on the rotor. Then, remove the rotor from the pump body, taking care not to damage the rotor blades.

Step 4: Disassemble the magnetic drive.

After removing the rotor, remove the magnetic actuator. The magnetic rotation device is usually composed of a magnetic sleeve, an outer magnetic steel and an inner magnetic steel. Use a wrench to turn the fixing nut of the magnetic sleeve counterclockwise to remove it. Then, remove the outer and inner magnetic steel from the pump body.

Step5: Cleaning and inspection.

After all the components are removed, they need to be . First, soak all parts in a cleaning solution to remove dirt and oil stains from the surface. Then, use a cleaning brush to remove hard-to-clean dirt from the surface of the part. Use a clean cloth to dry the parts, and carefully check for wear, cracks and damage.

Step 6: After cleaning and inspecting all the parts, the next step is to put them back together. In the reverse order of disassembly, the magnetic drive, rotor and pump body are raised in turn. During the assembly process, be careful to tighten the screws and nuts, but not too tight, so as not to damage the parts.

Step 7: Test

It is very important to disassemble the magnetic pump for testing. After the reassembly is completed, put the body back on the base and turn the fixing nut clockwise to fix it. Then, turn on the power, open the outlet valve of the pump, observe whether it is often used. If found, it should be stopped immediately, and check whether it is improperly assembled or other problems.

In SUMMARY:

Magnetic pump disassembly is a very important work that needs to be carried out in accordance with certain steps. In the process of disassembly, special attention is paid to the standardization and safety of the operation, so as to avoid damage or accidents. After the disassembly is completed, it is also necessary to clean and inspect, and carry out the necessary repair and replacement, only the maintenance of the magnetic pump, in order to ensure its normal operation and extend the service life.

The cause of centrifugal pump bearing vibration

Centrifugal pumps are widely used in chemical production, and bearing vibration problems will occur during the use of centrifugal pumps, which will reduce work efficiency and life. What are the causes of centrifugal pump vibration?

I. Imbalance: The wear of the centrifugal pump in operation will cause the bearing to be unbalanced, so that the bearing is subject to uneven load.

2. Pump deflection: centrifugal pump bearings may be deflected during operation, mainly due to uniform load caused by shaft assembly, pump shaft bending bearing wear and so on.

Link-B2B is a professional supplier listing service platform which will provide high quality and trustworthy supplier list to international buyers. If you are looking for fluorine plastic magnetic pumpsuppliers, feel free to visit Link-B2B.com and send a request.