Analysis on the application of alloy aluminum plate in indoor decoration

(1), indoor metope:

Traditional walls are generally treated with paints, but they are easy to get wet and difficult to clean. Therefore, some special places will use other materials for decoration. Compared with wallpaper, wallboard and other materials, the advantages of aluminum plate are obvious. Alloy aluminum veneer is widely used in the decoration of indoor walls in various places because of its less pollution, moisture-proof and sound-insulation, and strong practicability.

(2), home floor:

Aluminum alloy plate has high corrosion resistance. Adding a certain proportion of alloying elements to pure aluminum plate can improve the corrosion resistance of alloy aluminum veneer and prolong the service life of the floor.

Aluminum alloy plate has high thermal conductivity. From the physical point of view, the higher the thermal conductivity, the better the thermal conductivity.

(3), special-shaped ceiling:

Most suspended ceilings will use materials such as smallpox and Fangtong. Of course, there is no shortage of original plywood backing and scraping modeling. However, with the improvement of people's living standards, consumers pay more attention to its beauty and style besides its practicality. The alloy aluminum plate is like a magician's wonderful hand, and it turns over the clouds to achieve artistic scrolls with novel shape, elegant appearance and distinct personality.

(4), wood grain tracery:

In recent years, with the popularization and implementation of environmental protection policies, thermal transfer printing technology has been formally promoted in the aluminum veneer industry. The appearance of wood grain aluminum plate, stone grain aluminum plate, etc. replaces the consumable energy sources such as wood and marble as a whole, saves energy and protects the environment, and has good practical performance. Nowadays, in the decoration of gardens and villas, the heat transfer aluminum veneer is slowly devouring the scores of other materials.

As we all know, the proportion of cold air is relatively large, which will sink to the ground, and the cold air of air conditioner will be easily absorbed when it meets cement floor tiles, while the floor made of alloy aluminum veneer is equivalent to the ground thermal insulation layer, which prevents the cold air of air conditioner from being absorbed by cement, greatly improves the utilization rate of cold air, and reduces the loss of cold air of air conditioner in summer, thus making the air conditioner more energy-saving! The energy saving ratio refers to the data of 30% downward heat transfer loss.

At the same time, in winter, due to the good thermal conductivity of alloy aluminum plate, the floor heating can dissipate heat better, and a set of floor heating hot water system is added for customers in disguise, so that the owner's home can be really warm in winter and cool in summer.

Points for attention in preservation and management of alloy aluminum plate

(1) It is hoped that the aluminum plate will be handled according to the following essentials:

Compared with steel, aluminum has low strength and easy deformation, low surface hardness and deep marks. When handling aluminum plates, it is very important to avoid rubbing against each other and not colliding with other objects.

(2) The custody of aluminum plate:

Try to avoid long-term storage and excessive inventory;

Pay attention to the phenomenon of condensation on the surface of aluminum plate in rainy season;

Keep it in an environment with little dust and garbage.

(3) It is hoped that the aluminum plate will be handled according to the following essentials:

Try to use special trays and special lifting tools;

In the process of processing and molding and process flow, surface scratches are easy to occur. Before the operation, use polyethylene or polyvinyl chloride protective film to cover the protection, and when the surface treatment is needed, peel it off. This is a very beneficial measure to prevent scratching the aluminum surface.

(4) Keeping the alloy aluminum plate is expected to be operated according to the following points:

Try not to keep those aluminum plates that have not been used for a long time;

Keep it in a dusty environment or a dusty place on the warehouse floor, and don't pile it up in the open air for a long time;

In order to prevent dust and moisture, use dry canvas and polyethylene film to cover it;

Avoid placing aluminum plates near surface treatment plants that use chemicals such as acid or alkali;

Do not put the aluminum plate directly on the ground, but use sleepers or pads to separate it;

Try to remove ropes and reed mats and other packing materials before storing them;

In the rainy season with high humidity and temperature, when the aluminum plate is covered with polyethylene, a black oxide film will be produced on the surface of the aluminum plate due to high temperature and humidity.

When using pads and cardboard, we should pay attention to the hygroscopicity of the materials.

(5) Tips:

In the rainy season with high temperature and humidity, the natural oxide film may turn black.

This blackened oxide film is also difficult to clear with alkaline water, which deteriorates the appearance of the anodized surface.

If it is estimated that the above-mentioned surface state deterioration will occur, the PVC film covering the aluminum plate should be opened to make the air circulate smoothly.

It is necessary to pay special attention to the preservation of aluminum plates during the period of high temperature and high humidity.

Fully ventilate and exchange air, and paint the floor or pad. The concrete powder on the ground is alkaline and should be paid attention to.

Dust flying on the ground generally contains acidity or alkalinity, which is the key to corrosion of alloy aluminum plate. Pay close attention to dust flying when cleaning.

Link-B2B is a professional supplier listing service platform which will provide high quality and trustworthy supplier list to international buyers. If you are looking for aluminum plates  suppliers, feel free to visit Link-B2B.com and send a request.