Aluminum profiles can be seen everywhere in daily production and life, whether in the field of door and window curtain wall construction, or in the field of industrial aluminum profiles such as transportation, aerospace, machinery and equipment, advertising and decoration, municipal bridges, etc., they are all commonly used profiles with the characteristics of high strength, light weight, strong corrosion resistance, novel structure, convenient installation, material saving and durability. In the production and processing of aluminum profiles, attention should be paid to avoiding surface pollution. In order to ensure the practicality of aluminum profiles, it is necessary to maintain them during use to ensure their functionality and aesthetics.

Production and processing of aluminum profiles

During daily use and maintenance:

1. It is advisable to use soft cloth and towel to wipe the surface of aluminum profile. It is forbidden to use sandpaper, wire brush or other friction materials to scrub the surface of aluminum profile. Use warm water containing lubricant or neutral cleaning agent to clean it. Acid or alkaline cleaning agent shall not be used. If washing powder and strong acid and alkali cleaning agent cannot be used, the surface of aluminum profile will be easily corroded.

2. When the processed surface of aluminum profile is eroded and polluted, it should be cleaned in time. The scale can be scrubbed with soft cloth dipped in alcohol first, and then washed with clear water. After cleaning the aluminum alloy profile, the anodic oxide film can be polished with topcoat protective wax, or a layer of acrylate-based varnish can be sprayed evenly.

3. According to the use environment, the aluminum profile should be cleaned regularly to keep the brightness.

4. During the transportation and transfer of aluminum profiles, be extra careful, and handle them with care, so as to avoid the appearance bump caused by bumping; In the process of transportation, it must be covered with tarpaulin to prevent the invasion of rain; It is forbidden to load aluminum profiles loosely during shipment, so as to avoid the impact on the appearance of the profiles.

5. The storage environment of aluminum profiles should be dry and ventilated. When storing, the bottom of aluminum profiles must be separated from the ground with skids, and the distance between aluminum profiles and the ground should be more than 10CM. It is forbidden to register with chemical data and moisture data.

At the time of storage:

1. Keep away from sharp objects as far as possible. If there is a sharp object to scratch the industrial aluminum profile, it will definitely damage it, which will not only scratch the surface but also damage its performance.

Second, clean the surface in time. If the industrial aluminum profile is caught in the rain for a long time, it will lead to traces later and needs to be cleaned in time.

Three, industrial aluminum profiles need to be separated from the ground when stored, and there are separated plates. At present, most factories use shelves to store aluminum profiles.

4. Use neutral cleaning agent to clean. If there are stains on the surface that are not easy to clean, you should choose neutral cleaning agent to clean it to avoid damaging the oxide film on the surface, and wipe it off in time after cleaning. Take protective measures.

Everything needs to be maintained, and the aluminum profiles of industrial supplies should also be well maintained. I believe that through the finishing of the above small series, everyone has an understanding of the maintenance of aluminum profiles. The general surface of industrial aluminum profile products is anodized, which is very bright, wear-resistant, corrosion-resistant and easy to clean, so the service life can be extended if it is well maintained at ordinary times.

It is necessary to clean the welding joint and oxide film before the production and processing of aluminum profiles.

Now more and more fields and industries need to use all kinds of processing materials, one of which is aluminum profile. At present, aluminum profiles will still be well used, especially the main component is aluminum, so the products can be manufactured through this material. However, enterprises should pay attention to many aspects when producing and processing aluminum profiles, so as to ensure the welding quality and meet the welding needs of enterprises.

Production and processing of aluminum profiles

1. Clean the product surface before welding.

If you want to weld aluminum profile, you still need to clean the surface of the product before welding, especially the welding joint and oxide film. If you don't clean it well, it will directly affect the corresponding welding effect, and there will be other problems in the welding process, which will affect the quality of the welded products.

2. Make corresponding preparations during welding.

In addition to cleaning before welding aluminum profiles, we should also make corresponding preparations during welding, especially when using appropriate backing plates, because welding needs to be completed for different aluminum parts, so some smaller aluminum parts do not need preheating, but if the aluminum parts are thick and bulky, they need to be preheated accordingly, and welding can only be carried out after preheating to a certain extent, thus avoiding problems such as deformation during welding.

Since it is necessary to weld aluminum profiles, we should pay attention to many aspects, especially to do the corresponding cleaning, including the completion of specific welding preheating, etc. These are all necessary. Only in this way can we ensure the welding quality and successfully complete the welding, so that enterprises do not need to worry about other welding problems.

Link-B2B is a professional supplier listing service platform which will provide high quality and trustworthy supplier list to international buyers. If you are looking for aluminum profiles suppliers, feel free to visit Link-B2B.com and send a request.