Temperature and humidity used by industrial dehumidifiers

Modern production management mode puts forward new requirements for the factory environment produced by industrial enterprises, and the increasing production technology and process design requires students to be more sensitive to the temperature and humidity in the factory. Industrial dehumidifier can greatly improve and solve this problem, regardless of the process conditions, the humidity in the factory building is too high, which leads to the social production and equipment being damp, which seriously affects the company's production progress and delivery rate. Moreover, for environmental resources, molds can grow when the relative humidity is more than 60%, and the humidity is more than 85%, which is a high incidence environment for molds. Let's take a look at it ourselves. What is the research on the implementation effect of the conventional dehumidification scheme? Many manufacturers choose a traditional desiccant for dehumidification, but the teaching effect is not satisfactory; On the other hand, the desiccant still needs to be constantly updated economically, or it will cause waste of labor in China, and the repetitiveness will undoubtedly increase a lot of capital investment. So now more and more factories are learning to think about how to dehumidify in some simple ways. Let's take a look at the industrial dehumidifier with temperature and humidity.

The temperature and humidity used in the factory dehumidifier are industrial dehumidifiers!

I. Applicable places Industrial dehumidifiers can be applied not only to the workshops of modern production enterprises in China, but also to the following places with high requirements for temperature and humidity control:

1. Storage areas for information materials such as document rooms, libraries, libraries, museums and warehouses;

2。 Drying, dehumidification or storage of raw materials, semi-finished products and finished products in food, power distribution, chemical industry, aquatic products, agricultural and sideline products, printing, medicine, wood, home, papermaking and other industries;

3. Manufacturers of medicine in health care industry.

Second, the characteristics

1. According to the size and types of different treatment plants in the enterprise, there are certain applicable national machines when the dehumidification area is set to 80-1600 square meters;

2. The temperature and humidity of the air can be set freely, so as to realize automatic control and complete automation. Once set, it is easier;

3. It can turn on and off the protection function regularly, and it can be set from 1-24 hours;

4. With automatic fault detection function, if a fault occurs, it will automatically detect the corresponding fault code, which is convenient for maintenance;

5 Adopt internationally renowned brand compressor, with strong power and strong dehumidification ability;

6. The machine is at low temperature, with automatic defrosting, and the temperature is 5-38℃.

Third, the basic principle of dehumidifier industry

The dehumidifier consists of compressor, two fans, water tank, chassis and controller. First of all, the fan draws the moist air on the surface of the evaporator of the refrigeration system of the compressor below the dew point of the falling air of the machine. When it passes through the evaporator, the moisture in the air will be decomposed. At this time, the surface of the hydrophilic foil of the water flowing out of the evaporator with the moist air will flow to the evaporator, and when it is further discharged to the tank or drain pan, it will be discharged outside the machine after being heated and dried by the condenser, so that the indoor humidity will be reduced. Modern production management mode puts forward new requirements for the factory environment produced by industrial enterprises, and the increasing production technology and process design requires students to be more sensitive to the temperature and humidity in the factory. Industrial dehumidifier can greatly improve and solve this problem, regardless of the process conditions, the humidity in the factory building is too high, which leads to the social production and equipment being damp, which seriously affects the company's production progress and delivery rate. Moreover, for environmental resources, molds can grow when the relative humidity is more than 60%, and the humidity is more than 85%, which is a high incidence environment for molds. Let's take a look at it ourselves. What is the research on the implementation effect of the conventional dehumidification scheme? Many manufacturers choose a traditional desiccant for dehumidification, but the teaching effect is not satisfactory; On the other hand, the desiccant still needs to be constantly updated economically, or it will cause waste of labor in China, and the repetitiveness will undoubtedly increase a lot of capital investment. So now more and more factories are learning to think about how to dehumidify in some simple ways. Let's take a look at the industrial dehumidifier with temperature and humidity.

Link-B2B is a professional supplier listing service platform which will provide high quality and trustworthy supplier list to international buyers. If you are looking for  dehumidifier  suppliers, feel free to visit Link-B2B.com and send a request.