Some fittings will change in size, width and hole in order to match the profile.

There is a kind of fitting called industrial aluminum profile bracket, and there are three kinds of aluminum profile manufacturers. One is right-angle bracket industrial aluminum profile fitting, although both are right-angle brackets, there are some differences in width and hole, one is 45-degree bracket industrial aluminum profile fitting, and the other is 135-degree bracket industrial aluminum profile fitting.

Each aluminum profile has matching accessories, so there are many specifications of accessories. In order to match the profile, these accessories will change in size, width and hole. Here are the uses and specifications of three kinds of accessories brackets.

The right-angle bracket is made of aluminum alloy, which is made by cutting the material section from the extruded profile and drilling. The surface is sandblasted and oxidized (the end surface is not oxidized), with high connection strength, good flexibility and general performance, and simple and convenient installation. Mainly used for T-shaped, L-shaped or cross connection of profiles.

The 45-degree angle bracket is made of aluminum alloy, which is made by cutting the material section from the extrusion profile and drilling. The surface is sandblasted and oxidized (the end surface is not oxidized), with high connection strength, good flexibility and general performance, and simple and convenient installation. Mainly used for 45-degree angle connection of profiles.

The 135-degree angle bracket is made of aluminum alloy, which is made by cutting the material section from the extruded profile and drilling. The surface is sandblasted and oxidized (the end surface is not oxidized), with high connection strength, good flexibility and general performance, and simple and convenient installation. Mainly used for 135-degree angle connection of profiles.

Price comparison between European standard aluminum profiles and national standard aluminum profiles

There is an essential difference between European standard aluminum profiles and national standard aluminum profiles, which can be directly distinguished from the appearance.

European standard aluminum profiles and national standard aluminum profiles belong to industrial aluminum profiles. If they are divided into two categories, they are European standard aluminum profiles and national standard aluminum profiles, which are widely used in factory workshops to isolate, protect and divide operators and equipment.

There are essential differences between European standard aluminum profiles and national standard aluminum profiles, which can be directly distinguished from the appearance. For example, the notch of European standard aluminum profiles is trapezoidal, which matches T-shaped bolts or T-shaped nuts, and its four corners are excessively rounded and chamfered.

However, the notch of the national standard aluminum profile is rectangular, which matches the square nut and hexagon socket bolt, and the chamfer is small, almost right-angled.

Let's take a look at the comparison of prices. We all know that the price of industrial aluminum profiles is related to the bearing capacity. From the bearing capacity point of view, under the same specification, the weight of national aluminum profiles is heavier than that of European aluminum profiles, so the bearing capacity of national aluminum profiles is better than that of European aluminum profiles, that is, national aluminum profiles are more expensive.

In industrial aluminum profiles, it can be calculated by the meter or by the ton, which is actually related to the weight, and the choice should be based on the actual demand and economic conditions.

Safety protective guardrail, the advantages of using aluminum profile

The installation method of safety protective guardrail is to use the groove design of aluminum profile, just put the accessories directly and then fix them. All of them are assembled with accessories, which is quick to install and has no welding marks on the surface.

The continuous expansion of automation equipment in the market is the embodiment of scientific progress. In the face of a variety of materials, traditional steel is used as a safety guardrail, and industrial aluminum is used as a safety guardrail. Why does the safety guardrail made of industrial aluminum stand out?

In fact, it mainly depends on the application field. Industrial aluminum profiles are widely used in automation industry, automobile manufacturing industry, electronics industry, clean engineering and scientific research in colleges and universities, such as some factory workshops, office areas and operation rooms.

It has a wide range of uses, which can not be separated from its own advantages. Its installation method is to use the groove design of aluminum profile, put the accessories directly and then fix them. All of them are assembled with accessories, which is fast and has no welding marks on the surface. A hard aluminum oxide film is tightly attached to the surface, and then the surface treatment such as anodic oxidation can further strengthen its protective performance, so it is extremely corrosive. Anodic oxidation forms a permanent protective film, which is smooth and flat, never rusts, easy to clean and maintenance-free.

Link-B2B is a professional supplier listing service platform which will provide high quality and trustworthy supplier list to international buyers. If you are looking for aluminum profiles suppliers, feel free to visit Link-B2B.com and send a request.