Industry Industry Industry

What problems should be checked before installation of dehumidifier in warehouse workshop?

Industry

2023-07-17 12:01:17

What problems should be checked before installation of dehumidifier in warehouse workshop?


Whether the humidity set by the key humidity dispatching switch of the warehouse dehumidifier is appropriate, check whether there are obstacles in front of the air inlet and whether the doors and windows of the room are closed properly. Therefore, what problems should be paid attention to before the installation of the warehouse dehumidifier? It is very important whether the filter screen of the airflow dehumidifier is blocked. Once the air intake is affected, the dehumidifying effect of the warehouse dehumidifier is poor. Attention: whether there is dirt and corrosion on the evaporator (especially in bad places in the workplace, pay special attention). How to use the moisture storage machine: Before using it, pay attention to whether the evaporator is dirty or corroded (especially in places with bad workplace conditions, pay special attention). Set on the humidity dispatching switch.


Whether the degree is appropriate. Whether there are obstacles in front of the air inlet of the warehouse dehumidifier. Whether the doors and windows of the room are closed. Whether the indoor temperature has been rising or falling. Note: the low indoor temperature may affect the dehumidification effect, or even not dehumidify. If the indoor temperature is low, a heater can be used for heating to improve the dehumidification effect of the wet machine. Dehumidifier for warehouse: It is recommended to clean the filter screen with clean water below 40℃ and clean it with detergent. After washing the dust, rinse it with water, dry it in the shade and put it back in the body. When tidying up the body, quietly scrub it with a wet cloth; Avoid splashing water directly to finish the industrial dehumidifier, so as not to damage the electrical insulation. There is a sticky substance on the surface of the dehumidifier in the warehouse, which can be cleaned with soapy water to avoid spraying gasoline, petroleum essence, solvents or pesticides to avoid paint peeling or discoloration. Unplug the power cord when traveling in case of power failure or long-term non-use, so as to maintain the service life of the machine.


What are the differences between dehumidifiers and dehumidifiers?


There is no difference between dehumidifier and dehumidifier, because another name of dehumidifier is dehumidifier, which can be divided into home dehumidifier and industrial dehumidifier. Usually, a traditional dehumidifier consists of a compressor, a heat exchanger, a fan, a water container, a shell and a controller. Its working principle is that the fan draws wet air into the machine and passes through the heat exchanger. At this time, the water molecules in the air condense into water droplets, and the treated dry air is discharged outside the machine. This circulation keeps the indoor humidity at an appropriate relative humidity. Dehumidifier, also known as dehumidifier and dehumidifier, consists of compressor, heat exchanger, fan, water container shell and controller.


In recent years, dehumidifier has gradually expanded from commercial to household, and has become one of the indispensable modern household appliances in many families. In fact, the dehumidification function in refrigeration mode is only a by-product and does not increase the cost of air conditioning. The independent dehumidification mode uses electric heating or heat exchange to heat the air at the outlet, which will make the control more complicated and the design cost higher. However, this kind of temperature compensation will make the room temperature fluctuate less, which is suitable for use when the temperature is not high but the humidity is too high. The dehumidifier operates in dehumidification mode, and its refrigeration system is in a state of high efficiency. The evaporator and condenser operate reasonably and have high energy efficiency. The working mode of dehumidifier is cooling inside the machine. After analyzing the water in the air, the space temperature will rise slightly, but the temperature difference is not obvious. It is more suitable for humid seasons outside the summer, and the power consumption is relatively low.

Link-B2B is a professional supplier listing service platform which will provide high quality and trustworthy supplier list to international buyers. If you are looking for dehumidifier suppliers, feel free to visit Link-B2B.com and send a request.


Related Post

Ship Crane Slewing Bearings: Essential Components for Maritime Operations

Slewing bearings​ play a crucial role in the opera...


Metallurgical Crane Slewing Bearings: Key Components for Heavy-Duty Operations

Slewing bearings ​are essential for metallurgical ...


A Comprehensive Overview of Slewing Bearings for Container Cranes

Slewing bearings​ are essential components in cont...


The Appeal and Versatility of Custom Sweatshirts

Custom sweatshirts offer a versatile way for indiv...


Custom Women's Shirts: Elevating Style and Personalization in Fashion

Custom women's shirts offer numerous benefits that...