Which aluminum processing equipment will be used in aluminum profile processing?

Aluminum profile processing is the prerequisite of aluminum profile processing project, and these equipments are the basic hardware that aluminum profile processing enterprises must equip. What is the basic equipment for processing aluminum materials? Today, Fu Bo Xiaobian is mainly to share some simple but important equipment for everyone, so that everyone is no longer so unfamiliar with aluminum processing.

1. Aluminum cutting machine

Cutting machine, as its name implies, is used to cut aluminum profiles. Generally, the extruded aluminum profiles are all 6.02 meters, while the aluminum profiles needed for aluminum profile frame engineering are some long and some short. Therefore, it must be cut before it is assembled to the frame. It is also necessary to cut the aluminum profile. At present, the general aluminum profile processing factory can control the cutting error within+-0.3 mm..

2. Aluminum alloy tapping machine

Aluminum alloy tapping machine is actually a machine tool that uses taps to process internal threads, which is also commonly called tapping holes. Internal thread machining machine tool is a widely used one. At present, the development of aluminum tapping machine in China is relatively mature, and there are various models, mainly to break all kinds of threaded holes.

3. Aluminum alloy punch

Aluminum punch is what we say verbally. Many times, bolts are needed to assemble aluminum frame, and some need threaded holes. Some are not needed, for example, some plates only need to drill holes with appropriate diameters at specified positions. Punching machine can not only punch holes, but also bend plates or profiles.

Matters needing attention in aluminum profile processing-Fu Bo Aluminum Industry

Aluminum profile commonly used in industry is a kind of assembly line profile, such as 4040 aluminum profile and 3030 aluminum profile. However, aluminum processing is nothing more than drilling, cutting, tapping (threaded hole) and special surface treatment of extruded aluminum profiles. The following small series will introduce what problems should be paid attention to during aluminum processing?

As far as drilling is concerned, most of the time, not only aluminum profiles need to be drilled, but also steel plates are drilled in the frame engineering during the assembly process of aluminum profiles. When punching holes, the punching machine should be positioned correctly, and high-quality and qualified aluminum processing materials should be selected for processing. The surfaces of both plates and profiles should be smooth and flat, and the processed surfaces should be free of burrs, and the holes are also very smooth. If there are burrs, we will use high-quality and qualified aluminum materials for processing. Another important process of aluminum profile processing is tapping, which is the same as drilling. The tapping machine should adjust its position, select the correct aperture size, and ensure the threads of threaded holes are orderly. The other is cutting. Nowadays, many aluminum processors choose laser cutting, which has a smooth end face and high precision, and is generally controlled within+0.2 mm..

In addition to aluminum processing parts and aluminum quality, we should also pay attention to the service life of the above equipment and possible problems in use. Therefore, it is essential to choose the right products and the right equipment in aluminum processing for equipment maintenance.

Link-B2B is a professional supplier listing service platform which will provide high quality and trustworthy supplier list to international buyers. If you are looking for aluminum profile  suppliers, feel free to visit Link-B2B.com and send a request.