Why does the dehumidifier leak during use?

The condensate water of industrial dehumidifier has a large flow rate during the whole operation of dehumidifier, and it will be drained continuously. When water leakage occurs again, the first thing to check is whether the external drain pipe is brittle and cracked; Whether the connection between the plastic hose and the drain inlet of the condensate water storage tray of the dehumidifier is loose and firm; Or whether there is water leakage caused by virtual welding at the welding points of V-groove sheet metal parts of the water storage tray, so we must clean them one by one and deal with them symptomatically. 2. Check the wrapping method of thermal insulation materials of the compressor. During the whole operation of the dehumidifier, the refrigerant moves from the compressor to the two devices through copper pipes and capillaries, and takes away the moisture in the humid air passing through the evaporator. This is because the dew point temperature of the evaporator copper pipe is extremely low, and the condensed water generated on the surface of the copper pipe is not wrapped in place with thermal insulation materials, which causes the condensed water to seep out and cause water leakage. Thirdly, after the dehumidifier runs for a period of time, there will be a decrease in refrigerant consumption, or a leakage of cold medium due to defects in the manufacturing process. At this time, the evaporator can't be transferred immediately due to the lack of refrigerant, which leads to the freezing below the aluminum fins of the evaporator, and the defrosting effect of the dehumidifier is reduced. At the same time, the condensed water on the aluminum fins at the upper end of the evaporator can't be discharged into the plastic hose through the water storage tray because the frozen image spreads everywhere. The common method of troubleshooting is to contact the manufacturer or dehumidifier manufacturer for after-sales service and maintenance, and replenish the refrigerant of the compressor, so that common faults can be relieved.

Working principle and product characteristics of industrial dehumidifier with suspended ceiling pipeline!

The ceiling dehumidifier is a kind of freezing dehumidifier. The whole machine consists of compressor, heat exchanger, fan, water container, shell and controller. Its working principle is: the humid air is sucked into the machine by the fan, and frost is formed under the interaction of the refrigeration system (compressor, evaporator and cold detector). The system automatically heats the frost, and water flows into the water storage tank, resulting in dry air discharge. In this way, the indoor humidity is reduced, and the humid space gradually achieves the drying effect.

Ceiling dehumidifier products generally have the following characteristics:

First, all-plastic steel design, novel and beautiful shape, light and dexterous;

Second, the unit is equipped with important protection devices such as high and low voltage protection, anti-freezing protection and current overload protection. Third, the lifting ceiling dehumidifier has multiple functions of operation and fault display, and the operation is safe and stable. Fourth, the heat exchanger is carefully manufactured by imported processing equipment, with high heat exchange efficiency, compact structure, small operation vibration, low noise, large dehumidification capacity, low fault rate and long service life.

What should I do if the high-power industrial dehumidifier cannot be used normally?

In order to better store goods, more enterprises have purchased high-power industrial dehumidifiers to ensure that the storage environment meets the standards. Due to the purchase of high-power industrial dehumidifier, the requirements for current and voltage are quite high. You will encounter such a phenomenon that the newly purchased high-power industrial dehumidifier can't be started normally, automatically stops after connecting the power supply, or even burns a fuse, and the dehumidification is poor or can't be normal.

A fault in the circuit

Because the new machine you bought can roughly judge that there is no product quality problem in the high-power industrial dehumidifier itself, and it can be judged as a circuit fault. The investigation found that there are other electrical equipment in the wiring of industrial dehumidifier; Check the operating voltage of dehumidification equipment in different positions. The voltage difference between the tail and the head is about 20 volts, and it is found that the power cord is thin. Check again that the output voltage of the junction box is unstable, indicating that the external voltage is unstable and other heavy-load electrical appliances are running. Solve the problem after finding it.

Because the power cord is too thin, replace the power cord with a larger diameter. Stop using several high-power electrical appliances and make the high-power industrial dehumidifier run. Sharing the use line of industrial dehumidifier with other electrical appliances will lead to low voltage and low transportation speed of parts. Dehumidifying equipment stops running after turning on high-power appliances or during peak power consumption. The power transformer can also be increased according to high load.

The change of atmospheric circulation caused by the gradual warming trend of global climate will have a great impact on the climate in China and even the whole world. As a result, hot and cold alternate, and rainy weather is frequent. In order to ensure the quality of goods, major enterprises often have very high requirements for air humidity, so it is suggested to pay attention to some circuit problems after purchasing and using high-power industrial dehumidifiers.

Link-B2B is a professional supplier listing service platform which will provide high quality and trustworthy supplier list to international buyers. If you are looking for dehumidifier suppliers, feel free to visit Link-B2B.com and send a request.